A made-to-measure vanity fits awkward Toowoomba bathrooms, from narrow Queenslander bathrooms off the back verandah to ensuites in new Westbrook homes. A cabinet maker builds the unit, benchtop cut-out and drawers to suit the space, and a licensed plumber connects it.
Toowoomba Cabinet Makers is a referral service. We don't build or install vanities and we don't set prices. With your consent, we pass your enquiry to an independent local cabinet maker who quotes and contracts with you directly. This page is general information, not professional advice.
What the job usually involves
- Measuring the space, including where the waste and water pipes come through the wall or floor.
- Choosing wall-hung or floor-standing, single or double basin.
- Picking the benchtop, basin type and tapware so the cut-outs are made correctly.
- Installing the vanity, then the plumber connecting the basin, waste and taps.
Bathroom vanities in Toowoomba homes
In older homes, a vanity often has to clear window sills, existing pipes and a floor that drops towards the old drain. Wall-hung vanities need solid backing in the wall, which is easier to add while the bathroom is stripped. Moisture-resistant board and sealed edges matter even in Toowoomba's drier climate, because the bathroom itself is still a wet area.
What affects the price
- Vanity width and whether it's single or double basin.
- Benchtop material, the single biggest price variable.
- Wall-hung or floor-standing; wall-hung units need wall backing.
- Number of drawers compared with doors.
For published Australian price ranges, see the Toowoomba cabinet maker cost guide.
Before you book
- Confirm who supplies the basin and taps, and who books the plumber.
- All plumbing connections must be done by a licensed plumber, and any wiring by a licensed electrician.
- Check the business's licence or registration with the QBCC if the job is over the threshold set out on our home page.
Wall-hung or floor-standing
A wall-hung vanity floats off the floor, which makes a small bathroom look bigger and makes mopping easy. It needs solid fixing, which means timber noggins in a stud wall or proper anchors in masonry, and that's best planned before the wall is sheeted and tiled. A floor-standing vanity on a plinth or legs is simpler to fix, hides plumbing, and suits older homes where the floor isn't level.
Materials that cope with a bathroom
Bathrooms are the wettest room in the house, so the carcass should be moisture-resistant board with every cut edge sealed. Common door finishes are laminate, polyurethane and timber veneer. Solid timber vanities look beautiful but need a durable finish on every face, including the back and the underside. Toowoomba's dry spring air followed by steamy winter showers means the timber moves through more than most.
For the top, the choices are similar to the kitchen: laminate, timber, natural stone, solid surface, or porcelain. Engineered stone can no longer be supplied or installed in Australia (Safe Work Australia: engineered stone ban). An integrated basin top, where the basin and top are one piece, avoids a silicone joint that can grow mould.
Fitting in with the rest of the bathroom
A vanity is often the last thing in after waterproofing, tiling and plumbing rough-in. If you're renovating the whole bathroom, the order matters: the plumber needs to know the basin and tap positions before the walls are tiled, and the cabinet maker needs those positions to cut the back of the vanity. The basin, waste and taps are always connected by a licensed plumber. In Queensland, plumbing work needs its own licence whatever the value (QBCC: Cabinet making licence class).
Sizes and storage
Single-basin vanities are commonly 600, 750, 900 or 1,200 mm wide, and double-basin vanities often start at about 1,500 mm. Drawers are more useful than doors under a basin, but the top drawer needs a cut-out around the waste trap. A tall cupboard beside the vanity, or a shaving cabinet above it, adds storage without crowding the room.
Price guide
The vanity unit itself can be as little as $350 or more than $2,000 for high-end custom work, says hipages, and a professional install is typically a three-to-eight-hour job at $50 to $100 an hour (hipages: vanity installation costs (updated 23 Jan 2026)). Plumbing is extra. A made-to-measure vanity from a cabinet maker usually costs more than an off-the-shelf unit but fits the space exactly.
Frequently asked questions
Does the cabinet maker connect the taps?
No. In Queensland, plumbing connections need a licensed plumber at any value. Many cabinet makers coordinate with a plumber they work with, so ask when you get a quote.
How high should a vanity be?
Many people now choose around 850 to 900 mm including the basin, higher than older units. Ask what suits the users.
Can a vanity be built around existing plumbing?
Usually, yes. The cabinet maker measures the waste and water positions and cuts the back of the cabinet to suit. Moving the basin more than a little usually means a plumber has to move the pipes in the wall.
What's best for a small ensuite?
A shallow wall-hung vanity, around 400 to 450 mm deep, with drawers and a wall-mounted shaving cabinet, keeps the floor clear and the room feeling bigger.
Send an enquiry
Tell us your suburb, the room and what you have in mind, and add photos or plans if you have them. Send an enquiry. Looking for help with another room? See our overview of cabinet makers in Toowoomba.