We're an enquiry and referral service, not a cabinet maker. With your consent, we pass your enquiry to an independent local cabinet maker. How it works

Custom Kitchen Cabinets in Toowoomba

New kitchen cabinets are the biggest single cabinetry job most Toowoomba households take on. Whether it's a full replacement in a Rangeville brick home or a new kitchen for a Highfields build, a local cabinet maker measures the room, draws up a layout and builds the carcasses and doors to suit.

Toowoomba Cabinet Makers is a referral service. We don't build or install kitchens and we don't set prices. With your consent, we pass your enquiry to an independent local cabinet maker who quotes and contracts with you directly. This page is general information, not professional advice.

What the job usually involves

  • An on-site measure, including ceiling height, window positions and where the plumbing and power come in.
  • A layout drawing showing base cabinets, overheads, the pantry and appliance spaces.
  • Choosing doors, handles, the benchtop material and the internal fittings such as drawers and corner units.
  • Manufacture in the workshop, then delivery and installation over one or more days.

Kitchen cabinets in Toowoomba homes

Toowoomba's dry winters and big day-to-night temperature swings are hard on solid timber doors and benchtops, so many people choose 2-pac or laminate doors on moisture-resistant board, with timber used for open shelving or an island end panel. In older Queenslanders, expect the cabinet maker to allow for out-of-square walls, high ceilings and the odd sloping floor. A tall pantry that runs to the ceiling is popular in these homes because it uses height that stock units can't reach.

What affects the price

  • Linear metres of cabinetry: more cabinets, more cost.
  • Door finish: laminate usually costs less than 2-pac or timber veneer.
  • Hardware: soft-close runners, pull-outs and corner systems add up quickly.
  • Benchtop: laminate, timber, stone and solid surface vary widely.

For published Australian price ranges, see the Toowoomba cabinet maker cost guide.

Before you book

  • Ask whether the quote includes benchtops, removal of the old kitchen and the plumber and electrician, or just the cabinets.
  • Sinks, dishwashers, cooktops and new power points must be connected by licensed plumbers and electricians.
  • Check the business's licence or registration with the QBCC if the job is over the threshold set out on our home page.

Choosing board, doors and benchtops

Most kitchen cabinets in Australia are built from melamine-faced particleboard or MDF, and the better carcasses use a moisture-resistant grade around the sink and dishwasher. hipages notes that MDF is stronger than particleboard and that cabinets made from it cost more (hipages: kitchen cabinet maker costs (updated 6 Jan 2026)). Ask what board and thickness the quote is based on, and whether the edges are sealed where water sits.

For doors, the main choices are:

  • Melamine or laminate: hard-wearing and usually the cheapest. A good fit for rentals and busy family kitchens.
  • Vinyl wrap (thermolaminate): profiled shaker or routed doors at a lower price than painted, but it can lift if it sits too close to an oven without a heat shield.
  • Polyurethane (2-pac): a smooth painted finish in any colour. It costs more and needs care around chips.
  • Timber veneer or solid timber: warm and natural, and it suits older Queenslanders, but it needs sealing on all faces in Toowoomba's dry spring air.

Benchtops changed in 2024. Engineered stone benchtops, panels and slabs can no longer be made, supplied, processed or installed in Australia (Safe Work Australia: engineered stone ban). The ban doesn't cover natural stone, and products such as porcelain and sintered surfaces sit outside it if they're free of resin. Laminate, timber, stainless steel and solid surface are also common. Your cabinet maker will usually measure for the benchtop once the cabinets are fixed in place.

Planning a full kitchen renovation in Toowoomba

If the cabinets are part of a bigger renovation, the usual order of work is: strip out the old kitchen, then the plumber and electrician rough in new positions, then wall repairs and any new window, then the cabinets go in, the benchtop is templated and fitted, the splashback goes on, and finally the trades come back to connect the sink, cooktop and power. A kitchen without running water can easily last a couple of weeks, so plan a temporary set-up in the laundry.

In Queensland, a QBCC Cabinet making licence covers installing fitted cabinets on site, plus minor incidental work of another class worth no more than $3,300 in total. Bigger jobs that include tiling, wall changes and other trades are often run by a business that holds the Builder restricted to kitchen, bathroom and laundry class. Plumbing, drainage and gas always need their own licensed trades (QBCC: Cabinet making licence class).

Kitchens for rentals and investment homes

With almost a third of Toowoomba homes rented (ABS 2021 Census QuickStats, Toowoomba LGA), investor kitchens are a big part of local work. The usual brief is durable and easy to fix: laminate doors with a matching edge, laminate or timber benchtops, 600 mm and 900 mm standard widths so parts can be replaced, and soft-close hinges that survive heavy use. Ask the cabinet maker to leave a few spare doors or panels in the same colour. Board colours get discontinued, and a spare can save replacing a whole run after one door is damaged.

Price guide

National averages from hipages (hipages: kitchen cabinet maker costs (updated 6 Jan 2026)), not Toowoomba quotes:

  • labour: $50 to $75 an hour, and from about $120 an hour for custom work;
  • melamine-fronted kitchen cabinetry: about $4,300;
  • polyurethane: about $6,600;
  • mid-range custom 2-pac: about $10,200;
  • high-end timber or 2-pac: $15,200 and up. See our cost guide for more published ranges.

Frequently asked questions

How long does a new kitchen take in Toowoomba?

Allow for a measure, design sign-off and then several weeks of manufacture before installation. Ask each business for its current lead time, because it changes with the season and the workshop's bookings.

Can I keep my benchtop and replace only the cabinets?

Rarely. Benchtops are cut to the old cabinet layout and are hard to remove without damage. Most people replace both together.

Can I still get a stone benchtop in Toowoomba?

Yes, but not engineered stone, which has been banned in Australia since 1 July 2024. Natural stone is still available, and resin-free porcelain and sintered surfaces sit outside the ban. Ask your cabinet maker or benchtop supplier what they can source.

What deposit can a Queensland cabinet maker ask for?

Queensland caps deposits on regulated domestic building contracts. A higher deposit of up to 20% is allowed when more than half the contract value is work done off-site, and made-to-measure kitchen cabinets are a common example. See the QBCC's page on deposits and progress payments for the current limits.

Send an enquiry

Tell us your suburb, the room and what you have in mind, and add photos or plans if you have them. Send an enquiry. Looking for help with another room? See our overview of cabinet makers in Toowoomba.

Tell us about your job

Free, no-obligation enquiry. Include your suburb, what's happening and photos if you can.

Prefer email? Write to hello@toowoombacabinetmakers.com.au.

This form sends your project enquiry to Toowoomba Cabinet Makers at hello@toowoombacabinetmakers.com.au. If you tick the consent box, your enquiry will also be shared with our independent service partner once one is appointed, so they can contact you. Please don't include sensitive personal information.